Loading...
Serving Martinez, CA and surrounding areas. (925) 316-0060
Vehicles moving too fast through your driveway or private lane is a safety problem you can solve permanently. We build and install asphalt speed bumps that hold up through Martinez winters and every season after.
Speed bump installation in Martinez uses hot-mix asphalt built up in layers across your driveway or private lane, shaped into a smooth rounded profile, and compacted so it bonds tightly to the existing surface. Most single-bump residential jobs are finished in a few hours, with the surface ready for normal use after a 24-hour cure period.
Speed bumps work on driveways, shared private roads, and parking lots where vehicles are moving faster than is safe or where surface wear from repeated hard braking is shortening the pavement life. In Martinez, where longer hillside driveways and shared private lanes are common, a properly placed bump is one of the most reliable traffic-calming tools available to property owners.
If your existing pavement is cracked or deteriorating, it is worth addressing that first. Our asphalt sealcoating service can protect a healthy surface, or we can assess whether repairs are needed before the bump goes in.
If cars regularly speed through your driveway or private lane, a speed bump is one of the most reliable ways to slow them down. This is especially common on longer driveways and lanes that connect to a busier street - both common in Martinez hillside and waterfront neighborhoods.
When kids play near the driveway or pets have access to the yard, a fast-moving vehicle is a real hazard. A speed bump gives every driver a physical reminder to slow down, without relying on signs or conversations that can be ignored.
Private roads in Contra Costa County neighborhoods often have no posted speed limit and no enforcement. If your neighbors agree that traffic is a problem, a speed bump is a practical, low-maintenance solution that benefits everyone on the lane.
Repeated hard braking and fast acceleration tears up asphalt surfaces over time. If delivery trucks or contractors are accelerating aggressively on your driveway, slowing them with a bump reduces wear and extends the life of your pavement investment.
A basic speed bump installation covers the full width of your driveway or lane with a properly shaped hot-mix asphalt profile, feathered on both sides so there are no abrupt edges that could catch a tire or trip a pedestrian. We apply a tack coat to bond the new material to the existing surface, then compact the asphalt in layers to the correct height. The result is a solid, permanent bump that looks and performs like part of the original pavement.
For properties where a single bump is not enough - such as long private driveways or shared lanes - we can install multiple bumps spaced correctly to prevent vehicles from accelerating between them. We also offer painted stripes and reflective markers that improve visibility at night, which is a practical safety addition for any shared-use lane. If you are already scheduling a full repave or new parking lot paving project, adding speed bumps at the same time is significantly more cost-effective than booking a separate visit later.
Best for most residential driveways where one traffic-calming point handles the primary concern.
Ideal for longer private roads or shared lanes where a single bump would allow vehicles to reach problem speeds between endpoints.
Right for shared or semi-public areas where nighttime visibility and clear driver cues are important safety factors.
Most cost-effective when you are already investing in driveway or parking lot work - one mobilization covers both.
Martinez sits in the inland East Bay where summers are warm and dry and winters bring concentrated rainfall. Asphalt work needs dry weather to bond correctly - wet pavement prevents the tack coat from adhering - so spring and fall are the most reliable windows for installation, though dry summer days work well too. The clay-heavy soils common in Contra Costa County can shift with seasonal moisture changes, and a bump installed over cracking or heaving pavement will not hold. We assess the base condition before recommending any installation, because the bump is only as good as what it is bonded to.
We install speed bumps throughout Martinez and the broader Contra Costa area, including Concord and Walnut Creek, where shared private roads and hillside driveways present similar traffic-calming needs. If your property is subject to HOA rules, we can help you understand what approvals may be needed. For authoritative guidance on traffic calming standards, the National Asphalt Pavement Association and the California Department of Transportation both publish standards that inform installation practices.
Describe what you need - driveway width, lane length, any special concerns like drainage or shared access. We schedule a site visit to measure, assess the pavement condition, and discuss placement. We reply within 1 business day.
After the site visit you receive a written estimate covering bump dimensions, any striping or markers, and the total cost. Ask about the workmanship warranty - we are clear about what is included with no add-ons after work starts.
If your property is near the public right-of-way or subject to HOA rules, we confirm whether any approval is needed. This step can add a few days to a few weeks depending on the situation - addressing it early keeps the project on schedule.
The crew cleans the surface, applies a tack coat, places and compacts the hot-mix asphalt into the bump shape, and feathers both edges smooth. Keep vehicles off the bump for at least 24 hours. We walk the finished job with you before leaving.
Free site visit. Written estimate. We serve Martinez, Concord, Walnut Creek, and all of Contra Costa County.
(925) 316-0060A bump installed over cracked or heaving pavement will separate within a season. We check the existing surface and subgrade condition during the site visit and are direct about whether repairs should happen first. That honesty protects your investment.
Marine air off the Carquinez Strait affects how quickly fresh asphalt cures. The clay soils in this area affect how the base behaves season to season. We schedule and execute installations with these local conditions in mind, not just the weather app forecast.
We hold a current California contractor license you can verify through the CSLB online database. That credential means we are legally authorized for this work and held to state standards for quality and insurance.
Our estimates spell out dimensions, materials, and total cost so there are no surprises on billing day. We back the installation with a written workmanship warranty - if edges crack or the bump separates prematurely, we come back and fix it.
Speed bump work sounds simple, but the details matter - tack coat adhesion, correct profile height, feathered edges, and drainage planning all determine whether the bump holds for years or fails by the next wet season. Those details are what we focus on with every job we take in Martinez.
Protect your existing driveway surface from water intrusion and UV damage with a fresh sealcoat applied before adding traffic-calming features.
Learn MoreFull parking lot paving projects in Martinez - adding speed bumps to a new lot is easiest and most cost-effective when scheduled as part of the same job.
Learn MoreSchedule your speed bump installation in Martinez today. Spring and fall book up fast - get your estimate now.